Adjusting The Device - Siemens WM14N005NL Handleiding
Verberg thumbnails
Zie ook voor WM14N005NL:
- Gebruikershandleiding en installatie-instructies (60 pagina's) ,
- Gebruiksaanwijzing en installatiehandleiding (56 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Drain in a plastic
standpipe with rubber
run muff.
The water drain hose
with a bend
fix and secure.
Connecting the appliance electrically
Note Take the information on the
subject → Page 4
and avoid damage
→ Page 12 take care of your device
to use safely.
Insert the mains plug of the
1.
connecting cable of the device
into a socket in the vicinity of the
device.
The connection data of the device
can be found in the technical data
→ Page 55.
The mains plug for solidity control.
2.
Adjusting the device
To reduce noise and vibration and to
prevent the device from walking,
place it horizontally.
Note Take the information on the
subject → Page 4
and avoid damage
→ Page 12 take care of your device
to use safely.
Loosen the lock nuts with a SW17
1.
open-end wrench.
All manuals and user guides at all-guides.com
Set up and connect NL
To adjust the appliance, turn the
2.
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
All appliance feet must be firmly
planted on the floor.
Hand-tighten the counter nuts
3.
with a SW17 open-end wrench.
Hold the appliance foot while
doing so and do not raise it.
19
Advertenties
Inhoudsopgave
