Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
▶ Do not use the appliance with damp hands.
▶ Never operate a damaged appliance.
▶ Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶ Never place the appliance on or near hot surfaces.
▶ After switching off, wait until the drive has come to a complete
standstill.
▶ Keep hands, hair, clothing and utensils away from rotating parts.
▶ Never touch the edges of the blades with bare hands.
▶ Process hot food carefully.
▶ Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
damage
material
Avoiding
Avoiding material damage
▶ Do not operate the appliance at no-load.
damage
material
Avoiding
▶ Never use the blender jug in the mi-
crowave or oven.
Overview
Overview
1
→ Fig.
Overview
1
Speed setting
2
On button
3
Turbo button
4
Release buttons
5
Blender foot
6
1
Lid
7
Plastic blender jug
8
1
2
Whisk
9
Universal cutter L
10
Universal cutter XL
1
Depending on the model
2
separate operating instructions
Note: If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
Printed on 100% recycled paper
1
1
2
1 2
Avoiding material damage en
Controls
Controls
Controls
Speed setting
For continuous speed adjustment. Set the
rotary selector between ● (lowest speed)
and 12 (highest speed).
On button
To use the appliance at the preselected
speed.
Turbo button
To use the appliance at maximum speed.
Note: The appliance remains switched on
as long as one of the buttons is pressed.
protection
Overload
Overload protection
If the appliance switches itself off during
protection
Overload
use, the overload protection device has
been activated.
Remove the mains plug and leave the appli-
ance to cool down for approx. 1 hour to de-
activate the overload protection device.
Note: If the fault cannot be eliminated,
please contact customer service.
13
Advertenties
Inhoudsopgave
