Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3
before the first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material and any promotional stickers. Keep the material (protective foil, plastic, polystyrene and cardboard) out of reach of
children. Check the appliance after unpacking for any damage, possible from transportation. Place the appliance on a flat and
stable surface. Make sure there is enough open space around the appliance for the intake and/or outlet vents. A minimum
clearance of 10 cm is required between the appliance and any adjacent walls. The appliance needs good ventilation for easy
dissipation of heat, high efficiency of refrigeration and low power consumption. Make sure the appliance is placed in a level
horizontal position by screwing in the two adjustable front legs. Do not place the appliance next to radiators, heaters, stoves or in
direct sunlight.
Note: check the climat class of the appliance. When installing the appliance in a environment that is not suitable, the appliance
can not function properly.
Leave the appliance to stand for at least 3 hours before you insert the plug into the socket.
First clean the interior of the appliance. Use warm water and a neutral detergent. After cleaning, rinse the interior with clean water
and rub dry. Leave the appliance to dry for 1 to 2 hours.
CONNECTION TO THE MAINS
Check that the voltage in your home corresponds with the voltage printed on the back of the appliance and plug it in a socket.
4
usage
TEMPERATURE ADJUSTMENTS
Temperature settings
Setting MIN = minimum - low freezing temperature
Setting MID = medium - normal freezing temperature
Setting MAX = maximum - high freezing temperature
Set the temperature with the thermostat knob and choose a setting between MIN and MAX. We advise to set the appliance on
setting MED. The appliance now cools continuously until the set temperature has been reached. Do not place anything in the
appliance until the set temperature is reached. This usually takes 2 or 3 hours. Then set the thermostat at the desired setting and
place food into the refrigerator.
Set the appliance on a higher setting when the ambient air temperature rises to maintain the temperature inside the appliance.
Note:
The ambient air temperature, how often the door is opened and the position of the appliance can affect the internal temperature.
These factors must be taken into account when setting the thermostat.
• Do not put hot food into the appliance.
• Never introduce volatile, inflammable or explosive fluids such as alcohol, acetone or petrol because of the risk of explosion.
• It is advisable to wrap meat and fish to avoid odours.
• Leave sufficient space between the food to enable air to circulate correctly between them. Similarly, when storing
them, avoid puttin food items in contact with eacht other.
• The door should not be left open any longer than necessary.
• Do not freeze too large an amount of food at one time; the faster the food is frozen, the longer is preserves its qualities.
• Place frozen food in the freezer compartment as soon as possible after purchase. Make sure that it doesn't defrost during
transport.
• Do not store glass bottles or containers with liquids in the freezer which will freeze. The freezing may cause the bottles to break.
Highly carbonated drinks can even explode. Never keep lemonade, fruit juice, beer, wine, champagne, etc. in the freezer.
23
English
•
Advertenties
Inhoudsopgave
