Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1) General
B
efore carrying out any work on the fan, disconnect it from the electrical supply3
�
C
heck if the electrical specifications of this appliance are compatible with your installation. The suppler accepts
�
no responsibility for any physical injury or material damage resulting from incorrect use or installation of this
fan. If you have the slightest doubt, please contact electrician.
U
nauthorized use and technical modifications to the appliance can lead to danger to life and health.
�
T
his appliance can be used by children aged from 8 years and above and persons with reduced physical,
�
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision
C
hildren should be supervised to ensure that they do not play with the appliance.
�
T
his appliance is for indoor use only.
�
M
eans for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
�
N
ever install the appliance in a moist or wet room.
�
B
e careful when working near the rotating blades. The fan should be installed at least a height of 2.3m
�
B
efore pushing the reversible slide switch, it is necessary to stop the action of the blades by turning off the fan
�
D
on't place your arm or other object in the path of the blades, when the fan is operating.
�
A
lways maintain the minimum distance between the lamp and any inflammable material (curtains,
�
wall etc), as indicated on the pictogram
M
eans for all poles disconnection having a contact separation that provide full disconnection under over
�
voltage category III conditions must be incorporated in the fixed wiring in accordance with national wiring rules.
P
ower supply wire from ceiling needs 1.5 sq mm wire
�
W
arning: Before obtaining access to terminals, all supply circuits must be disconnected.
P2
EN
Advertenties
Inhoudsopgave
