Advertenties
Beschikbare talen
Beschikbare talen
Operation
7.2
Using the cooling device
NOTICE!
A
When using the refrigerator as a milk cooler, also see the in-
structions in the customer documentation of your coffee maker.
Like every refrigerator, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise, it may not
work properly.
NOTE
I
Seal the opening on the side of the appliance with the plug if you
have not fed a tube inside (fig. 3 A, page 4).
➤ Place the refrigerator on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
NOTE
I
For use as a milk cooler for coffee makers only, the refrigerator has
holes in both sides, sealed with a black plug (fig. 3 A, page 4).
Remove the plug (fig. 3 B, page 4) and push the milk tube sup-
plied into the appliance. Now the coffee maker can draw up cold
milk directly from a suitable vessel inside the refrigerator.
➤ Insert the flat plug of the 230 V cable (fig. 1 2, page 3) into the socket
(fig. 2 1, page 3) on the appliance and insert the power plug into the
230 V socket.
or
➤ Insert the flat plug of the 12 V cable (accessory) into the DC socket
(fig. 2 2, page 3) and connect it to the cigarette lighter socket or a 12 V
socket in your car.
➤ Push the switch (fig. 3 3, page 4) on the control panel to "HOT" or
"COLD" to switch the device on.
✓ The refrigerator starts cooling/heating the interior and the appropriate
LED lights up.
NOTICE!
A
Ensure that the objects placed in the refrigerator are suitable for
cooling or heating to the selected temperature.
22
MyFridge MF-5M
EN
Advertenties
