Download Inhoudsopgave Inhoud Print deze pagina

Description Of The Device - Adler europe AD 1121 Gebruikershandleiding

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 36
appliances such as an electric stove, gas burner, etc.
11.Do not use the device near flammable materials.
12.The power cord must not hang over the edge of the table or touch hot surfaces.
13.Do not leave the device or the power supply to the outlet unattended.
14.To provide additional protection, it is advisable to install in the electrical circuit, a
residual current device (RCD) with a rated residual current of not more than 30 mA. In
this regard, please consult an electrical specialist.
15. Use and store the device only in a dry room.
16. Do not allow the device to get wet with water. If the device gets wet, first disconnect
the plug from the power outlet with dry hands. Then take the device to a service center
for inspection or repair of the device.
17. Do not put any objects on the device.
18. Ensure that the ventilation grilles are always uncovered. An obstructed ventilation
grille can cause damage to the unit and even cause a fire.
19. Do not place open sources of fire or heat on or near the unit.
20. Do not leave the battery in the device if it will not be used for more than a week.

DESCRIPTION OF THE DEVICE

1. sNOOZE button
3. tIME/MEMORY button
5. hOUR/TUNING UP button
7. oN/OFF button
9. aLARM 2/VOLUME DOWN button 10. battery box
11. power cable
CLOCK SETTING
Open the battery compartment (10) and insert a new 2 x LR03 (AAA) battery. The battery maintains the clock's operation in case of
power failure in the mains. Plug the mains cable (11) into an outlet. Turn off the radio with the ON/OFF button (7). Press and hold
the TIME button (3).The time display will flash. Set the correct time by pressing the HOUR setting button (5) and then the MINUTE
setting button (6). Press the TIME button (3) for confirmation.
SETTING THE ALARM
Turn off the radio with the ON/OFF button (7). Set the alarm by pressing and holding the ALARM 1 button (2). The time display will
flash. Press the ALARM 1 button to choose between waking up with a beep (the LED next to the bell icon will light up on the
display), or waking up with the radio (the LED next to the note icon will light up on the display). Next, select the alarm time by
setting the hour with the HOUR button (5) and the minutes with the MINUTE button (6). Press the ALARM button (3) for
confirmation. In the same way, you can set a second alarm by pressing ALARM 2 button (9) respectively and repeating the
remaining steps. Once the alarm is set, an LED will light up next to the corresponding clock icon. You can turn off the alarm for 9
minutes by pressing the SNOOZE button (1) or completely by pressing the corresponding ALARM button (2 or 9) (then the word
OFF will appear and the icon backlights will turn off).
AUTOMATIC RADIO SHUTDOWN.
By pressing the SLEEP button (4) you can leave the radio running before going to sleep. It will turn off automatically.
LISTENING TO THE RADIO
2. aLARM 1/VOLUME UP button
4. sLEEP button
6. mINUTE/TUNING DOWN button
8. mODE button
4

Advertenties

Inhoudsopgave
loading

Inhoudsopgave