Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EnGlish
20
Problem
Possible cause
Dirty water
Impurities or chemicals
and impurities
present in the water have
come out of
deposited in the steam
the soleplate or
vents and/or on the
the soleplate is
soleplate.
dirty.
The ironing
This may be caused by
board cover
steam condensing on the
becomes wet
ironing board cover after
or there are
a long ironing session.
water droplets
on the garment
during ironing.
All manuals and user guides at all-guides.com
8
Carry the steam generator by holding it with both
hands on either side.
9
Specific types only: Carry the steam generator by
holding it by the handle of the iron with one hand and
supporting the bottom with the other hand.
This only applies to types with carry lock.
troubleshooting
This chapter summarises the most common problems you
could encounter with the appliance. If you are unable to
solve the problem with the information below, contact the
Consumer Care Centre in your country.
Solution
Clean the soleplate with a damp cloth
(see chapter 'IMPORTANT - DESCAL-
ING', section 'Descaling the soleplate of
the iron').
Replace the ironing board cover if the
foam material has worn out. You can
also add an extra layer of felt mate-
rial under the ironing board cover to
prevent condensation on the ironing
board. You can buy felt in a fabric shop.
Advertenties
Inhoudsopgave
Probleemoplossen
