Advertenties
Beschikbare talen
Beschikbare talen
O P e r A T I n G I n S T r u C T I O n S
HDMI to component AV converter
Item no. 1095853
Intended use
The product is designed to transform an HDMI-compatible AV signal into an analog video component signal
and an analog audio signal. An external power adapter is provided for power supply.
It is imperative that you follow the safety instructions and all other information contained in this user ma-
nual.
This product complies with the statutory national and European requirements. All company names and pro-
duct names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• Converter
• Power adapter
• Operating instructions
Safety instructions
In case of damage caused by non-observance of these operating instructions, the war-
ranty gets void! We are not liable for any consequential damage!
We are not liable for property damage or injuries caused by improper use or non-obser-
vance of safety instructions! Such circumstances will void the warranty!
a) General
• Unauthorized modifications and/or alterations to the product are not permitted due to safety and approval
reasons (CE). Do not disassemble the product.
• Have maintenance or repairs done by qualified personnel only.
• Do not leave packaging material unattended, as children could use it as a toy creating hazardous situa-
tions.
b) Power adapter
• The power adapter features a protection class II design. Only use a proper wall socket as voltage source
for the power adapter.
Connect the power adapter to a wall socket that can be accessed easily.
• Use only the included power adapter to power the converter.
• Never pull the cable when disconnecting the power adapter from the wall socket. Hold the power adapter
at the sides of the enclosure and then pull it from the wall socket.
• If the power adapter is damaged, do not touch it. There is a risk of fatal electric shock!
First disconnect the mains voltage supplying the wall socket to which the power adapter is connected (turn
off the respective circuit breaker or remove the fuse, then turn off the ground fault circuit interrupter in order
to disconnect all poles of the wall socket from the mains voltage).
Only then disconnect the power adapter from the wall socket. Dispose of the damaged power adapter
properly. Do not use it anymore. Replace it with a power adapter of identical construction.
c) Operation
• The device is not a toy. Keep devices to be operated by mains supply away from children. Use extreme
caution when children are present.
Operate the product out of reach of children.
• The product is only suitable for use in dry, closed indoor areas. The complete product must not become
wet or damp. Never touch the product with wet hands!
In regard to the power adapter, there is a risk of fatal electric shock!
• Avoid the following adverse conditions at the location where the product is placed, and during transport:
- wetness or high humidity
- cold or heat and direct sunlight
- dust or flammable gases, vapors or solvents
- severe vibration and blows of any kind
- strong magnet fields, such as near machines or speakers
• Do not place any objects on the converter; never cover the converter.
• Select a stable, flat and horizontal surface of sufficient size for installation.
• Never use the product immediately after it has been brought from a cold room into a warm one. The con-
densation generated could destroy the product. A wall plug transformer also poses the risk of fatal injury
due to electric shock!
Allow the device to reach room temperature before connecting and using it. This may take several hours.
• When setting up the device, ensure that the cable does not get kinked or crushed.
• Handle the product with care; impacts, blows or falling from even low heights can cause damage.
All manuals and user guides at all-guides.com
• Connect the converter's HDMI input to the corresponding output of e.g. your Blu-ray player.
• Connect the component output's 3 RCA sockets to the corresponding input on e.g. your TV/monitor.
Green socket „Y":
Red socket „Pr":
Blue socket „Pb":
Version 03/14
• Connect the 2 RCA sockets of the converter's audio output to the corresponding input on e.g. your TV/
Red socket „R":
White socket „L":
• Connect the power adapter's low-voltage round plug to the corresponding socket on the converter.
• Connect the power adapter to a wall socket.
• Turn on your playback device and your television/monitor. If necessary, select the right input on your
Disconnect the power adapter from the mains before cleaning the product.
Use a dry, soft and clean cloth for cleaning. Do not use any aggressive cleaning agents as these may lead to
discoloration. To prevent scratch marks, do not apply too much force on the surface during cleaning.
You can use a clean, long-haired brush and a vacuum cleaner to easily remove any dust.
a) Converter
Input...............................................................1x HDMI
Output ............................................................1x component video signal (Y, Pb, Pr)
Ambient temperature .....................................0 °C to +40 °C
Ambient humidity ...........................................20% to 90% relative humidity, non-condensing
Dimensions (L x W x H) .................................88 x 117 x 25 mm
Weight approx. .............................................145 g
b) Power adapter
Operating voltage ..........................................100 - 240 V/AC, 50/60 Hz
Output ............................................................5 V/DC, 2 A
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad electronic Se.
Connection and operation
Component signal „Y"
Component signal „Pr"
Component signal „Pb"
monitor or audio amplifier.
Right stereo audio signal
Left stereo audio signal
television/monitor.
Please note:
If there is no picture, try setting a lower resolution (e.g. 480i or 576i instead of 1080p) on your
playback device (e.g. Blu-ray player).
Many older TVs/monitors cannot display resolutions via the component input higher than 480i or
576i.
Cleaning
Disposal
Electrical and electronic devices do not belong in your household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
Technical data
1x stereo audio signal (L, R)
Advertenties
