Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Slim LED Light
FUNCTIONAL DESCRIPTION
(only for versions with motion sensor)
This light is equipped with an infrared sensor. It is switched on automatically if the sensor detects
motion in the environment.
If possible, do not direct the motion sensor at swimming pools, heating air exhausts, air conditi-
oning units or objects which are exposed to major temperature fluctuations. Avoid directing the
motion sensor at trees or bushes or at places which could be frequently visited by pets. The motion
sensor can be horizontally rotated to the right and to the left.
When mounting the light remember that the motion sensor will react most sensitively to motions
crossing its field of detection from one side to the other and least sensitively to motions directly
approaching the unit.
ADJUSTING THE MOTION SENSOR
Fig. 4
10 ± 5 sec. - 5 ± 1 min.
Light adjustment (sun and moon symbol, right):
The light adjustment determines from which brightness level the sensor will switch on the light.
The (
) position indicates that the sensor works by day and at night, in (
will only work at night. To adjust the sensor, wait until the desired ambient brightness is reached.
Completely rotate the light adjustment controller to the (
in the direction of the (
The light will now be activated from the set brightness when a motion is detected.
Motion sensor:
Detection range:
Time adjustment:
Ambient brightness: 0 – 2000 Lux
MAINTENANCE
Attention: The LED light does not contain components that require maintenance.
The LED light source of this light must only be replaced by the manufacturer, a service
technician sent by the manufacturer, or by another person with similar qualification.
Never open the light when the mains plug is still connected to the mains.
Caution: Risk of fatal injury from electrical current!
B
L
N
180°
0 - 2000 LUX
) symbol until the light is switched on by the motion.
passive infrared sensor
up to 12 m/up to 90° (horizontal)
approx. 10 sec. to 5 min.
Operating instructions
C
Rotate the cover of the motion sensor by 180°
downwards; two controllers will appear (see
fig. 4).
Time adjustment (clock symbol, left):
Using this controller, you can select any switch-on
time between approx. 10 seconds and 5 minutes
after the last motion was detected. Rotating the
TIME controller clockwise decreases the time
period, rotating it counterclockwise increases it.
) symbol. Slowly rotate the controller
D
B
L
N
) position, the sensor
11
Advertenties
Inhoudsopgave
