Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Turning On/Off the Presence Detection Function
50cm
60±10cm
• With its ultrasonic sensor 50 cm above the desktop, it detects at 60 ± 10 cm in front of
the screen and has a conical detection shape.
• When the Presence Detection function is on, if the user leaves the detection area for
more than 5 minutes, the lights will automatically turn off to save power.
• With the Presence Detection function on, if you manually turn off the lamp, the
Presence Detection function will be disabled temporarily and the Presence Detection
indicator will flash for about 30 seconds. When the indicator stops flashing, the
Presence Detection function will resume and the lamp will turn on if you are still in the
detection area.
• Do not block the ultrasound sensor on the lamp. Otherwise
the Presence Detection function will not work properly.
• Do not insert any object into the ultrasound sensor to avoid
malfunction of it.
• The presence detection function operates based on motion
tracking. If users maintain a fixed posture in front of the
screen for more than 5 minutes, such as when watching
videos, it may cause the sensor to detect no movement and
subsequently turn off the light.
My Favorite Mode
4
English
The Presence Detection function allows the lamp
to turn on automatically when the user enters
the detection area (as shown in the figure).
• To turn on the Presence Detection function, tap the
Presence Detection
indicator will light up.
• To turn the function off, tap the Presence Detection
key again. The indicator will go out.
After you manually adjust the lamp's brightness and
color temperature settings, you can use this function to
save them as your favorite mode.
1. Adjust the lamp's brightness and color temperature
settings according to your preference.
2. When done, tap and hold the My Favorite Mode
key for approximately 3 seconds. The Brightness
Adjustment
and My Favorite Mode
simultaneously to indicate that the settings are
saved successfully.
To access My Favorite Mode, tap the My Favorite Mode
key.
key. The Presence Detection
, Color Temperature Adjustment
indicators will flash 3 times
Ultrasound sensor
Advertenties
Inhoudsopgave
