Advertenties
Beschikbare talen
Beschikbare talen
Operating instructions
4 outlet suspension socket strip, 1.5 m
Item no. 1388632
Intended use
The socket strip provides four mains sockets with protective earth contacts, which can be used to
connect electrical loads. All of the sockets can be turned on or off together using the on/off button, which
features a built-in light.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition,
improper use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions
carefully and keep them. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Suspension socket strip
• Operating instructions
Up-to-date Operating Instructions:
1.Open produktinfo.conrad.com in a browser or scan the displayed QR code.
2.Select document type and language and enter the item number into the search
field. After submitting the query you can download displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If
you do not follow the safety instructions and information on proper handling in this manual,
we assume no liability for any resulting personal injury or damage to property. Such cases
will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
• Also observe the safety information and operating instructions of any other devices which
are connected to the product.
• Before connecting to the mains, make sure that your local AC mains voltage matches the
specifications on the nameplate.
• The device was built according to protection class I. It must only be connected to a mains
socket with a protective earth contact.
• Never pour any liquids over electrical devices or put objects filled with liquid right next to
the device. If liquid or an object enters the interior of the device nevertheless, first power
down the respective socket (e.g. switch off circuit breaker) and then pull the mains plug
from the mains socket. Do not operate the product anymore afterwards, but take it to a
specialist workshop.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. Allow the product to reach
room temperature before connecting it to the power supply and putting it to use. This may
take several hours.
• The mains outlet must be located near to the device and be easily accessible.
• Never pull the mains plug from the socket by pulling at the cable. Always pull it from the
mains socket using the intended grips.
• Unplug the mains plug from the mains socket if you do not use the device for an extended
period of time.
• Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
All manuals and user guides at all-guides.com
Operation
• Completely unwind the mains cable when using the socket strip and ensure that there are no loops.
• Plug the socket strip into a properly grounded mains socket (wall socket).
• The product can be hung from a suitable location using the fold-out hook.
• Connect up to 4 loads to the sockets on the socket strip.
• The sockets can be turned on/off using the large on/off switch (pushed in = on, not pushed in = off). The
Maintenance and cleaning
• Never use aggressive and abrasive detergents, rubbing alcohol or other chemical solutions, as these
• You do not need to carry out maintenance work on the product. Under no circumstances should you
• Disconnect the product from the mains before cleaning and remove all connected devices from the
• Use a dry, soft and clean cloth to clean the product.
Disposal
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage...............................................250 V/AC, 50Hz
Total connected load .........................................Max. 3680 W (16 A)
Child safety lock .................................................Yes
Cable type............................................................H05VV-F, 3G x 1.5 mm²
Cable length ........................................................1.5 m
On / off switch ..................................................... 2 poles (N/L), with integrated blue control light
Operating/storage conditions ..........................-20 to +50 °C, 10 – 90 % RH
Dimensions (W x H x D).....................................295 x 48 x 58 mm
Weight ..................................................................429 g
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put
under mechanical stress. Avoid excessive thermal stress on the mains cable from extreme
heat or cold. Do not modify the mains cable. Otherwise the mains cable may be damaged.
A damaged mains cable can cause a deadly electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains
socket (e.g. via the respective circuit breaker) and then carefully pull the mains plug from
the mains socket. Never use the product if the mains cable is damaged.
• A damaged mains cable may only be replaced by the manufacturer, a workshop
commissioned by the manufacturer or a similarly qualified person, so as to prevent any
danger.
• Never plug in or unplug the mains plug when your hands are wet.
• Each socket on the socket strip comes with a child safety lock. The socket can only be
unlocked by inserting the pins of a plug into both of the socket openings at the same time.
However, you should still exercise particular caution when children are present. Children
are unaware of the hazards resulting from the incorrect handling of electrical devices.
Handling the product incorrectly may cause a fatal electrical shock!
• Do not overload the socket strip. Pay attention to the maximum permitted total power
consumption of all connected loads in the "Technical data" section.
• Insert the mains plug on the socket strip into a wall socket.
• Do not connect the product in series! Do not connect any other socket strips or other
power distribution devices to the product. This can lead to an overload, which constitutes
a fire hazard!
• Do not operate the device while covered. The socket strip and the connection cable will
become warm when there is a high connected load. This constitutes a fire hazard!
• De-energised only when unplugged.
• Only use the product in temperate climates, not in tropical climates.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or
at a qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Mount the product in a suitable location. Lay the cable such that nobody will trip over it. Use suitable
padding to protect valuable surfaces against scratches.
light in the on/off switch illuminates when the sockets are turned on.
could damage the housing or even impair the functioning of the product.
service any of the components in the interior of the product, therefore never open/dismantle it. Repair
or maintenance work must only be carried out by a specialist or a repair centre.
socket strip.
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
V2_0116_02-LS
Advertenties
