Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Manual - DMX Tool 3
TEST DMX
1.
From the main menu, press "DMX Console".
2.
You will get a grid of the first 16 DMX channels, press NextPage to go to the next 16
channels.
3.
Select the addresses you want to modify.
4.
Move the slider at the bottom to set a value.
5.
With "Back" you return to the main menu.
4.
Adjust the parameters to the following:
•
Type: Set the type of your chip. These are
the first 3 letters of chipset. Eg: UCS for
UCS512H4
•
Chip: Choose the corresponding chip for
your Ekpoled. (see table at the front for the
correct chipset)
•
You can skip "LampNo" and "Channel".
•
Addr: set to the desired DMX address.
5.
Connect the Ekpoled you wish to program
to the DMX Tool 3. Pin 1 connects to GND,
pin 2 connects to B and pin 3 connects to A.
6.
Press "Write Addr" to upload the set ad-
dress to the Ekpoled.
7.
Press "Return" to return to the main menu.
Advertenties
Inhoudsopgave
