Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Controlpanel
(choice
options
the remote controle
are identical)
Cleaning and maintenance
Switch the fan off and remove the plug from the socket if you wish to clean the
device or perform maintenance.
The fan only needs general, exterior maintenance. Dust it regularly with a soft cloth
or duster or use a vacuum cleaner with a soft brush to clean. If it is very dirty,
open the grille and clean grilles and blades using a soft, damp cloth and a mild
household cleaning agent. Dry everything thoroughly and allow the fan to dry
properly before reassembling and using again. Ensure that water does not come
into contact with anything other than the grille and blades. Never rinse or spray the
fan!
In order to prevent material discolouration or deformities, never use aggressive or
corrosive (cleaning) products.
If the fan is to be stored at the end of the season, repack in its original packaging:
this offers the best protection. Store it in a safe and dry place that is not subject to
extremes of heat or cold.
Function
Description
in
ON/OFF
On/Off switch:
When pressing 'ON/OFF', the fan starts at the
lowest speed.
Speed
Setting the fan speed, low (L), medium (M) or
high (H)
Mode
Mode setting:
Natural wind: by varying the fan speed, the
fan imitates a natural wind. Speed button
continues to work, natural wind low (L),
medium (M) or high (H)
Silent: silent ventilation position.
Timer
Setting the number of hours that the fan must
ventilate.
Set-up from 0.5 to 7.5 hours.
Pressing 1x: 0.5 hour, pressing 2x: 1 hour,
pressing 3x 1.5 hour, etc.
Osc/Swing Pressing this knob the fan to have it oscillate
(swivel). Pressing it once again stops the
oscillation (swivelling).
25
Advertenties
Inhoudsopgave
