Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
personnel in training can only use the product under
supervision and responsibility of skilled engineers.
Intended use
1
The product has been designed as a control box to operate an
extraction fan and halogen lamp cartridge in an extraction
hood. Using the product for other purposes is considered
contrary to its intended use. The manufacturer accepts no
liability for any damages or injury resulting from such use. The
product has been built in accordance with state-of-the-art
standards and recognized safety regulations. Only use this
product when in technical perfect condition in accordance with
its intended use and the instructions explained in the user
manual.
Technical specifications
The specifications given in this manual must not be altered.
Modifications
Modification of (parts of) the product is not allowed, except
the bottom plate, which is allowed to be used as entrance
point for external cabling.
Installation
- The installation of this product is exclusively reserved to
authorised, well-trained and qualified engineers.
- Inspect the product and check it for damage.
Verify the functioning of the safety features.
- Never install the product in front of entrances and exits
which must be used for emergency services.
- Make sure that the workshop, in the vicinity of the product,
contains sufficient approved fire extinguishers.
Use
- Check the working environment. Do not allow unauthorised
persons to enter the working environment.
- Protect the product against water and humidity.
- Use common sense. Stay alert and keep your attention to
your work. Do not use the product when you are under the
influence of drugs, alcohol or medicine.
- Make sure the room is always sufficiently ventilated;
this applies especially to confined spaces.
Service, maintenance and repairs
ATTENTIoN!
Maintenance should only be performed by
authorised, qualified and trained persons (skilled)
using appropriate work practices.
WARNINg
Electrocution hazard
Disconnect mains before servicing. Failure to do so
could result in serious personal injury or death.
3
INSTALLATIoN
WARNINg!
Do not attempt installation of this unit unless you
are familiar with the necessary tools, equipment,
utility connections and potential hazards.
Installation should be performed only by a qualified
service provider. Failure to do so could result in
reduced performance of the unit, serious personal
injury or death.
1.
"Intended use" as explained in EN-ISO 12100 is the use for which the technical
product is suited as specified by the manufacturer, inclusive of his directions in
the sales brochure. In case of doubt it is the use which can be deduced from
the construction, the model and the function of the technical product which is
considered normal use. Operating the machine within the limits of its intended
use also involves observing the instructions in the user manual.
0000101012/010713/A SA-24
All manuals and user guides at all-guides.com
WARNINg!
Fire hazard
Never install the control box in areas with
flammable gases.
ATTENTIoN
The SA-24 control box is delivered without cables
for external field wiring. All interconnect cables/wire
size used shall comply to the NEC codes. The glands
used for inserting the cable into the SA-24 control
box should be placed in the bottom of the casing.
The cable should fit tightly in the gland to prevent
any moisture entering the inside of the SA-24
control box.
3.1
Unpacking
Check that the product is complete. The package should
contain:
- SA-24 control box
- door key
The starter is delivered as standard complete with dual switch
assembly, 10 m (32.8 ft) cable, to be mounted onto the hood,
built-in contactor and a transformer. The contactor must be
fitted with relevant fan motor overload protection (not
included).
3.2
Electric connection
• Connect the SA-24 in accordance with the separately
supplied electrical diagram.
CAUTIoN!
Electric connection to be executed in accordance
with local requirements. Ensure compliance with the
EMC regulatory arrangements.
WARNINg!
Make sure the machine is suitable for connection to
the local mains. Information about the connection
voltage and frequency can be found on the
identification plate.
4
mAINTENANCE
The SA-24 requires no specific maintenance.
5
TRoUBLEShooTINg
If the SA-24 does not function (correctly), consult your
supplier.
EN - 4
Advertenties
Inhoudsopgave
