Advertenties
Beschikbare talen
Beschikbare talen
CONTRÔLEUR EASILED GIRO
CODE : 45152
WARNING: The installation must be carried out by qualified persons in accordance with the standards and regulations in force. It is recalled that the decision to install the products in an environment compatible and in compliance with the standards and good practices is the full responsibility of the
EN
buyer and the installer. Read and follow the instructions before installing, powering on or using the products. We do not accept any liability resulting from improper implementation or installation of the products.
The devices must not be modified, even partially, otherwise the warranty will not apply.
IMPORTANT: Always turn off the power to the network before each installation or maintenance operation.
Turn the rotary dimmer switch anti-clo-
ckwise to decrease the intensity from
100% to 1%.
1. TECHNICAL SPECIFICATIONS
Purpose: Wall control for monochrome LED products: dimming
Input voltage 220-240VAC
Input current: 15mA
Number of independent zones: 1
Number of channels: 1
Signal transmission: HF radio 868/869.5/434MHz
IP code: IP20
Protocol used: EASILED RF
Material: plastic/glass
Operating temperatures: 0°C à +40°C
2. CONTENTS
x1 wall controller
screws
3. PRECAUTIONS BEFORE INSTALLATION
Do not install the device while it is switched on.
Do not expose the device to humidity.
4. INSTALLATION
Turn the rotary dimmer switch clockwise
to intensity the intensity from 1% to
100%.
Press the rotary dimmer
switch to switch the
light on/off
5. ADJUSTING THE SETTINGS
- Make sure you have your controller(s) wired and switched on
- Press the PAIRING button on the controller once
- Adjust the rotary switch until the LED product connected to the controller flashes, indicating
proper pairing
NB: Max 8 commands are pairable per controller
EUROPOLE - 19, avenue ZAC de Chassagne - 69360 TERNAY - Fax : +33 (0)4 72 24 73 42 - www.europole.net
2
Advertenties
