Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
20522_20120614 _UG_124x176mm_80g_DA21_Marmitek Connect DA21 User Manual 14-06-12 15:02
ADVANTAGES
•
Convert your digital audio signals (Toslink or Coaxial) to a left/right stereo audio
signal.
•
Perfect if your Audio Amplifier has too few or no digital audio inputs.
•
With improved 192kHz sample rate for the best sound reproduction.
•
Supports uncompressed digital stereo signals.
•
Supports 16 or 24bit; 8, 32, 44.1, 48, 96, 176.4 and 192kHz sample frequencies.
INSTALLATION
Note:
•
We recommend that you switch off your equipment before connecting cables in
order to prevent any of the devices being damaged.
•
At all times, avoid bending the optical (Toslink) cable as it is very delicate.
Audio Source
1. Connect the Audio Source to one of the digital audio inputs [1] on the
Connect DA21™ using the optical or coaxial audio cable.
2. Connect the Audio Amplifier to the stereo audio outputs [2] on the
Connect DA21™ using the (supplied) RCA stereo audio cable.
3. Connect the power adapter [3] and plug into the electrical socket.
4. Use the switch [4] to select which digital audio input (Coaxial or Optical) is
connected to the Connect DA21™.
5. Switch your device on and check that the audio connection works.
USAGE
If the audio connection does not work (properly), consult the instructions for the Audio
Source and/or the Audio Amplifier for the correct settings.
FREQUENTLY ASKED QUESTIONS
Please go to www.marmitek.com if you have any questions.
4
[1]
[4]
[2]
[3]
Audio Amplifier
© MARMITEK
Advertenties
Inhoudsopgave
