Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
vehicle.
Start by removing the car stereo from your
vehicle. You may need release keys to do
so.
Refer to your car stereo's wiring diagram.
Before
you
install
the
components, check that the installation
locations have been selected in such a way
that the cable length is sufficient to
connect
every
element.
installation is complete, make sure that no
cables are pinched or trapped.
The connection number indications in the
next
sections
correspond
connections represented on the diagrams
p.6 / 7.
Connecting the audio cable
Join the vehicle audio cable to the
connector of the Parrot ASTEROID Mini
(Connections 1A and 2).
If your vehicle is equipped with an
amplifier, use the Front and Rear Line Out
individual
outputs on the electronic box to avoid
saturation problems such as popping in the
speakers, background noise etc. Use one
or two jack cable(s) to connect the Parrot
Once
the
ASTEROID Mini Line out outputs to your
vehicle audio system (Connection 1B on
the diagram p. 7).
to
the
Connecting the power cable
1. Unplug the battery before installing
the power cable.
2. Connect the ISO male connectors of
the Parrot ASTEROID Mini to the car
stereo (Connection 3).
3. Join the vehicle's power supply cable
to the ISO female connector of the
Parrot ASTEROID Mini (Connection
4).
The red wire of the Parrot ASTEROID
Mini cable must correspond to the
constant +12V supply, the orange wire to
the ignition +12V and the black wire to
ground. Check that the orange wire is not
connected to the constant +12V supply, as
English
15
Advertenties
Hoofdstukken
Inhoudsopgave
