Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Faulty Function
Light does not switch on
Light switched on at the wall switch?
Check the connected lines
Check the illuminant
7. Changing Lamps
Always change lamps in good time before the end of the service life to prevent damages to persons,
the light or other objects.
Disconnect the product from the mains first and allow it to cool down before changing the bulb (lamp).
Let the lamp cool down after previous operation.
Only use approved lamps for the light. You will find details
on the approved lamps on the type plate.
Check that the lamp is correctly inserted in the lamp holder before commissioning.
8. Technical Data
Product
Connection
500053
230 V AC, 50 Hz
9. Care
Disconnect the entire product from the mains first and let it cool down before cleaning or maintaining the
product.
Clean the product regularly using only a slightly moist, soft and lint-free cloth.
Pay attention to any enclosed instructions.
10. Waste Disposal
Old electronic devices must be taken to public waste disposal sites and must not be put into general
household waste.
Light
GU 10 max. 2x 10W LED
Protection Type
Protection Class
IP 65
3 of 3 | 05.12.2018
I
Advertenties
Inhoudsopgave
