Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION AND CONNECTION
Mounting an extra rubber supporting
When mounting the extra supporting, the appliance must be disconnected from the
mains power.
Allow the appliance to stand upright for at least 4 hours before you connect the appliance
to the mains. This reduces the risk of malfunctions resulting from transport effects on the
refrigerant unit.
The extra supporting prevents the appliance from tipping forward when:
•
the refrigerator is empty, and
•
the door is loaded to its maximum (15 kg), and
•
the door is opened about 90 degrees.
Install the extra supporting as follows:
1. Tip the appliance and locate the screw hole at the left side of the bottom.
2. Place the screw in the screw hole of the extra supporting A.
3. Attach the extra supporting using a scross-shaped screwdriver (not included).
A
EN 15
Advertenties
Hoofdstukken
Inhoudsopgave
