Translation of the original manual
WARNINGS - SAFETY RULES
SAFETY INSTRUCTIONS
This manual includes guidelines on the operation of your device
and the precautions to follow for your own safety. Ensure it
is read carefully before first use and keep it handy for future
reference.
These instructions should be read and understood before anyone
operates the product. Any modifications or maintenance that
are not specified in the manual should not be undertaken. The
manufacturer is not liable for any injury or damage due to non-
compliance with the instruction manual. In case of problems or
uncertainties, please consult a qualified person that is able to
handle the device correctly. This device should only be used
for charging and / or start-up and / or power supply within
the limits indicated on the device and in the manual. The safety
instructions must be followed. In case of improper or unsafe use,
the manufacturer cannot be held responsible.
Device suitable for indoor use only. Do not expose to rain or
excessive moisture.
This device may be used by children from age 8 and by persons
with reduced physical, sensory or mental capabilities or lack
of experience and knowledge, provided that they are under
supervision or have been told how to use the device safely and
are aware of the potential risks. Children must not use the device
as a plaything. Cleaning and servicing tasks may not be carried
out by children unless they are supervised.
Do not operate the device with a damaged power supply cord
or a damaged mains plug.
Do not cover the device.
Connection :
• This device must be connected to an earthed power supply
• This equipment complies with IEC 61000-3-2
• This equipment complies with IEC 61000-3-11
Entretien :
• The power cable cannot be replaced. If the cable is damaged,
the unit should be discarded.
• Maintenance should only be carried out by a qualified person.
• Warning! Always unplug the power plug from the wall outlet
before performing any work on the unit.
• Under no circumstances should solvents or other aggressive
cleaning agents be used.
• Clean the surfaces of the unit with a dry cloth.
HOT AIR GUN 650°C
EN
5