Advertenties
Beschikbare talen
Beschikbare talen
C. Time Display
There are two different kinds of time displays:
1. 12-hour display: the digital number is from 11:59 to 12:00 with AM or PM shown on the LCD.
2. 24-hour display: the digital number is from 00:00 to 23:59, no AM or PM is shown on the LCD 1/4.
3. To change from 12-hour display to 24-hour display, or vice versa, press CLOCK Button and hold it till the LCD display changes. Press CLOCK
Button again to return to original display.
D. Week & Time Setting
1. Week Setting
1.1 Press and hold the SET Button until the week display flashes, which indicates setting is ready
1.2 Press + Button to increase the day, or Button to reduce the day, the sequence of the display is shown as follows:
Mo->Tu->We->Th->Fr->Sa->Su
1.3 Press
Button once will increase or reduce the day by sequence slowly. To press and hold the button, the week display moves quickly.
Release the button until your desired day of the week shown on the display. Press SET Button to confirm your setting.
2. Time Setting
2.1 After setting the day of the week, hour display flashes to indicate setting time can be started
2.2 Press +Button to increase number of hour, or Button to reduce hour.
2.3 Press
Button once will increase or reduce each hour slowly. To press and hold the button, the hour display moves quickly. Release the
button until your desired hour shown on the display. Press SET Button to confirm your setting.
2.4 "Minute" display then flashes to indicate setting minute is ready. Repeat the same procedures in setting hour as in #2.2 and #2.3 to set
minutes.
3. Summer Time Setting
3.1. Press CLOCK Button and Button at the same time to change to summer time, time display automatically adds one hour and "S" is shown
on the LCD.
3.2. By pressing Clock Button and Button again to cancel the summer time setting.
Noted:
LCD must be in real time display to start week and time setting. If LCD is in program setting display, press CLOCK Button once to return to
real time display.
E. Program Setting
1. When the LCD is in real time display, press + Button once to change to program setting display, "1ON" will be shown on the lower left corner
of the LCD:
1.1 "1" indicates the program group's number (program group is from 1 to 14)
1.2 "ON" indicates power on time.
1.3 "OFF" indicates power off time
2. To chose the program group and on/off status, press + Button to increase the group number, sequence as follows:
1ON->1OFF-> ...... 20ON->20OFF-> d ON/OFF (for countdown)-> real time display
3. To reduce the program group number, press –Button, LCD displays in the following sequence: d ON/OFF (for countdown)
->20OFF->20ON-> ...... 1OFF->1ON-> real time display
4. After choosing the program group, then can set the week and time. Press SET Button until the week display flashes, press + Button each
time, the LCD will display the following in sequence:
4.1 MO TU WE TH FR SA SU
4.2 MO ->TU->WE->TH->FR->SA->SU
4.3 MO WE FR 2/4
4.4 TU TH SA
4.5 SA SU
4.6 MO TU WE
4.7 TH FR SA
4.8 MO TU WE TH FR and
4.9 MO TU WE TH FR SA
5. By pressing the –Button, the week display will be shown in the opposite direction as above sequence.
6. Press
Button once will increase or reduce the week display slowly. To press and hold the button, the display moves quickly. Release the
button until your desired week pattern shown on the display. Press SET Button to confirm, week display stops flashing.
7. After set the day of the week, the hour display flashes, repeat procedures mentioned in Part D2. Time Setting to set time.
8. To set other program group's on/off time, repeat procedures mentioned from #2 to #7.
Noted:
(a). To change a preset program, repeat procedures #2 to #7 as mentioned in Part E and input the new data to replace the old setting
(b). After program setting, press CLOCK Button to return to clock display at once, or it will be returned automatically after 15 seconds without
pressing any other buttons.
F. Countdown Setting
1. When the LCD is in real time display, press Button once to change to countdown setting display, "d ON (or OFF)" will be shown on the lower
left corner of the LCD
1.1 "d": indicates the program is in countdown mode
1.2 "ON": counting down the power on time
1.3 "OFF": counting down the power off time
2. Press SET Button until the on/off display flashes, setting the countdown power on/off status is ready.
3. Press
Button to chose countdown on/off program and press SET Button to confirm
© GEP
www.regenwater.com
www.gep-rainwater.com
Tel. NL +31 (0)183 610520
BE +32 (0)56/299.701
info@regenwater.com
Advertenties
