Chauvet Professional Ovation F-145WW Handleiding pagina 3

Inhoudsopgave

Advertenties

Beschikbare talen

QUICK REFERENCE GUIDE

DMX Linking

The Ovation F-145WW will work with a DMX controller using a 3- or 5-pin DMX data connection. A DMX Primer is

available from www.chauvetprofessional.com.

DMX Connection

The Ovation F-145WW uses a 3- or 5-pin DMX data connection for its DMX personalities: 1Ch: 8bit Dim, 2Ch: 16bit

Dim, 2Ch: 8bit Dim+Zoom, and 5Ch: 16bit-Full. See the User Manual for information about connecting and configuring

the product for DMX operation.

Master/Slave Connection

The Ovation F-145WW uses the DMX data connection for its Master/Slave mode. See the User Manual for information

about connect and configure the product for master/slave operation.

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally

along existing DMX cabling. The Ovation F-145WW supports RDM protocol that allows feedback to monitor temperature

and changes to DMX Address, DMX Personality, Dimmer Mode, and LED Frequency menu options. Download the

User Manual from

www.chauvetprofessional.com

for more details.

Mounting

Before mounting this product, read the

Safety

Notes. Use at least one mounting point per product. Make sure the

mounting clamps are capable of supporting the weight of the product. For our CHAUVET Professional line of mounting

clamps, go to http://trusst.com/products.

Mounting Diagram

Mounting Clamp

Safety Cable

Secure the safety

cable using the

passageway on

the back of the

product

Ovation F-145WW QRG Rev. 1

Inhoudsopgave

Advertenties

Inhoudsopgave