Download Inhoudsopgave Inhoud Print deze pagina

EUROM FLOW-PRO 550CW Instructieboekje pagina 15

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

so, take the pump to your supplier or to an accredited professional to open the
device and remove the residue.
 If you regularly use the pump at different locations, you must rinse with clean
water (inside and out) after each use.
 Keep the base of the well (or the tile on which the pump is positioned) free from
mud and residue.
 Ensure that the pump does not freeze. Before winter sets in, run the pump dry
and store it in a frost-free location.
DEFECTS – CAUSES – SOLUTIONS
Defects
Pump does not start
Pump runs but does
not pump water
Insufficient water
Pump does not start or
suddenly switches off
while functioning
Pump does not start
and stop in AUTO
setting
If these tips do not provide a solution, contact your supplier or service point.
Causes
No electricity
-
Overheating safeguard
-
activated
-
Pump is stuck
Inlet openings are clogged
-
Water drainage pipe is bent or
-
hose is blocked
-
Air around the blade
-
Blade is jammed
-
Water level is too low (manual
usage)
CW: return valve in pump
-
outlet is blocked
Inlet openings are (partially)
-
blocked
-
Outlet drain (partially) blocked
-
Broken fan
Thermal safeguard stops pump
-
due to overheating
-
Water is too hot
-
Power outage
Dirt or stones in the water
-
supply
-
Blade is stuck
Problem with the motor
-
-
Pump is not vertical
The float is stuck
-
15
Solutions
Check electrical supply
-
See: overheating safeguard.
-
-
Clean float and float axle
Clean them
-
Straighten the hose or remove the
-
blockage
-
Switch the pump off and move it from
side to side. Wait until the air has
escaped and switch on again
Try to remove the blockage or ask a
-
professional to do so
Submerge the pump in deeper water
-
Remove blockage
-
Clean them
-
-
Remove blockage
-
Replace the fan
See: overheating safeguard
-
-
Max. water temperature 35°C
-
Check fuses and earth leakage
-
Remove dirt and stones
Remove blockage if possible or
-
consult service point
Consult service point
-
-
Make sure the pump is standing up
straight
Clean the float
-

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor EUROM FLOW-PRO 550CW

Deze handleiding is ook geschikt voor:

Flow-pro 550dw26.149.326.152.3

Inhoudsopgave