Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION MANUAL
1
Turn the top cover of the motion sensor clockwise (img. 1).
2
Loosen the screws in the connection terminal. Connect the power to connection terminal of the
motion sensor according to the connection diagram (img. 2)(img. 3).
3
Fold the metal spring of the motion sensor upwards. Insert the motion sensor into the hole or
installation box. Once Released, the springs will fix the motion sensor in place (img. 4)(img. 5).
4
Turn the LUX knob clockwise to the maximum setting (sun). Turn the TIME knob anti-clockwise
to the minimum setting (10s) (img. 6).
5
Turn on the power. After a warm-up time of 30 seconds, the motion sensor will start operation.
When the sensor receives the induction signal, the connected lamp will turn on. If the motion
sensor receives no further induction signal, the load stops working within 10 seconds (±3
seconds) and the connected lamp will turn off.
6
Turn the LUX knob anti-clockwise to the minimum setting (3). If the ambient light is more than
3LUX, the motion sensor will not activate and the connected lamp will not turn on. If the ambient
light is less than 3LUX, the motion sensor will activate. If no induction signal is present, the
motion sensor will deactivate within 10 seconds (±3 seconds) (img. 6).
TECHNICAL SPECIFICATION
DETECTION RANGE: 360°
VOLTAGE: 220-240V/AC
FREQUENCY: 50/60Hz
RATED LOAD: 800W (Incandescent lamp)
400W (Energy-saving lamp & LED lamp)
DETECTION DISTANCE: max. 6m (<24°)
TIME DELAY: 10sec ± 3sec to 15min ± 2min (adjustable)
AMBIENT LIGHT: <3-2000LUX (adjustable)
INSTALLATION HEIGHT: 2.2-4m
4 | © Copyright 2020 Hoftronic
Advertenties
Inhoudsopgave
