Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All feeding of water treatment to the pool water has to be done downstream of the heat pump(2)
It is normal for condensation to come out of the heat pump. This is not a leak or fault with the unit. If the
humidity is very high, the condensation could be a number of liters a day.
4.2. Hose connection.
Step 1
It is normal for condensation water to come out of the heat pump when it is operating. This is not a fault or
leak!
4.3. Electrical connection
Hot Splash Heat pump
RCD. Available in
EU-VERSION and UK-VERSION
Outdoor socket
Make sure your outlet is earthed.
The pool circulation pump must operate with the heat pump. Therefore, connect them to the same circuit
used for outdoor.
4.4. Electrical connection with timer
The controller of the Hot Splash heat pump has a
memory so that the settings are retained even if the
power is switched off and on. This makes it possible
to operate the heat pump with a timer. The timer must
be installed between the heat pump and the RCD
plug, see picture. The installation must be carried out
by a certified electrical installer in order to guarantee
quality and safe operation.
The pool circulation pump must operate with the heat pump. Therefore, connect them to the same circuit
used for outdoor.
Step 2
Circulation pump
Hot Splash Heat pump is
available with inline RCD and plug version
Outdoor socket
Circulation pump
5
Advertenties
Inhoudsopgave
