Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cleaning and Maintenance
Warning Risk of electric shock!
• Penetrating moisture may result in an electric shock. Clean the appliance using a
damp cloth only. Before cleaning, pull out the mains plug or switch off the circuit
breaker in the fuse box. Risk of electric shock!
• Do not use any high-pressure cleaners or steam cleaners, which can result in an
electric shock.
Cleaning surfaces
To ensure that the different surfaces are not damaged by using the wrong cle-
aning product, follow the instructions in the table. Do not use any of the following:
•
Harsh or abrasive cleaning agents, e.g. liquid scouring cleaner,
•
Cleaning products with a high alcohol content,
•
Hard scouring pads or cleaning sponges,
•
Pressure washers or steam cleaners,
•
Cleaning products that dissolve limescale,
•
Aggressive all-purpose cleaning products,
•
Oven spray.
--> Stainless steel
Hot soapy water: Clean with a dish cloth and then dry with a soft cloth. Clean stainless
steel surfaces in the direction of the grain only. Special stainless steel cleaning products
are available from our after-sales service or from specialist retailers. Apply a very thin
layer of the cleaning product with a soft cloth.
--> Painted surfaces
Hot soapy water: Clean using a damp dish cloth and then dry with a soft cloth. Do not
use stainless steel cleaner.
--> Aluminium and plastics
Hot soapy water: Clean with a soft cloth.
--> Glass
Glass cleaner: Clean with a soft cloth. Do not use a glass scraper.
Cleaning Grease filters
Grease filters must be cleaned once a month, with non abrasive detergents, by
hand:
• Soak the metal grease filters in hot soapy water
• Clean the filters with a brush and then rinse them thoroughly.
• Leave the metal grease filters to drain on an absortbent material.
Slight discolouration may occur if the metal grease filters are cleaned in the dish-
washer. This discolouration has no effect on the performance of the metal grease
filters.
30
Advertenties
Inhoudsopgave
