Samenvatting van Inhoud voor Pro Audio Trade DMX24
Pagina 1
Gebruiksaanwijzing / Manuel d’utilisation User manual Pro Audio Trade bvba info@proaudiotrade.be Heilig Hartstraat 23 www.proaudiotrade.be 8870 Izegem (Belgium) Tel: 051 31 28 03 BE 0895 812 618...
Pagina 2
24 Channel DMX Decoder Part No: bkl-dmx24 All manuals on: http://www.proaudiotrade.be/manuals RoHS Made in PRC Imported by Pro Audio Trade Heilig Hartstraat 23 8870 Izegem Belgium...
Gebruiksaanwijzing - DMX24 INLEIDING Hartelijk dank voor de aanschaf van onze producten. Om de prestaties van uw laser te opti- maliseren, dient u deze gebruiksaanwijzing zorgvuldig door te lezen en vertrouwd te raken met de basisbediening van dit systeem. Deze instructies bevatten ook belangrijke veilig- heidsinformatie over het gebruik en onderhoud van dit systeem.
TECHNISCHE EIGENSCHAPPEN IN- EN UITGANGEN Input voltage 12-24V DC Input current 120.5A Output voltage 24x 12-24V DC Output current 5A/Ch Output power 24x 60-120W Output type Constant voltage VEILIGHEID EN EMC EMC standard (EMC) EN55032:2015, EN61000-3-2:2014, EN61000-3-2:2013, EN55024 :2010/A1:2015 Safety standard(LVD) EN 61347-1:2015 EN 61347-2-11:2015 Certication...
Gebruiksaanwijzing - DMX24 BEDRADINGSSCHEMA Verbinden met groene terminal (DMX AMP) of een extra versterker is nodig wanneer meer dan 32 decoders zijn aangesloten, of bij gebruik van een te lange signaallijn. Sig- naalversterking mag niet meer dan 5 keer continu worden uitgevoerd.
Pagina 6
• Houd de <- en ->-toets 2 seconden ingedrukt om de fabrieksinstellingen te herstellen. DMX decoder mode DMX decode start adres: 001~512 DMX decode mode: • DIM (1CH enkel kleur) 8 outputs • CCT (2CH kleur temperatuur) 16 outputs • RGB (3CH) 24 outputs Zie adresseringstabel op het einde.
Pagina 8
8 BIT AANTAL ADRESSEN Kanalen 16 BIT AANTAL ADRESSEN Kanalen...
Pagina 9
Gebruiksaanwijzing - DMX24 16 BIT AANTAL ADRESSEN Kanalen...
Pagina 10
Manuel d’utilisation - DMX24 INTRODUCTION Merci d’avoir acheté nos produits. Pour optimiser les performances de votre laser, veuillez lire attentivement ce manuel et vous familiariser avec le fonctionnement de base de ce sys- tème. Ces instructions contiennent également des informations de sécurité importantes sur l’utilisation et l’entretien de ce système.
Manuel d’utilisation - DMX24 PARAMÈTRES TECHNIQUES ENTRÉES ET SORTIES Input voltage 12-24V DC Input current 120.5A Output voltage 24x 12-24V DC Output current 5A/Ch Output power 24x 60-120W Output type Constant voltage SÉCURITÉ ET CEM EMC standard (EMC) EN55032:2015, EN61000-3-2:2014,...
Manuel d’utilisation - DMX24 SCHÉMA DE CÂBLAGE La connexion avec le terminal vert (DMX AMP) ou un amplificateur supplémentaire sera nécessaire lorsque plus de 32 décodeurs sont connectés ou en cas d’utilisation d’une ligne de signal trop longue. L’amplification du signal ne doit pas être effectuée plus de 5 fois en continu.
Pagina 13
Manuel d’utilisation - DMX24 • Appuyez longuement sur les touches M & > pendant 2 secondes pour entrer en au- to-test rapide. • Appuyez longuement sur les touches < & > pendant 2 secondes pour restaurer les pa- ramètres par défaut d’usine.
Pagina 14
Manuel d’utilisation - DMX24 <<&>> : Appuyez sur la touche < ou > pour passer à la page précédente ou suivante, chaque page contient 3 canaux. Mode maître DMX en tant que contrôleur RGB Dynamic RGB mode: 10 programmes Mode speed: 1-10 vitesses, Level 10 vitesse plus haut Mode brightness: 10%-100% PROGRAMMA’S...
Pagina 15
Manuel d’utilisation - DMX24 8 BIT NOMBRE D’ADRESSES Canaux 16 BIT NOMBRE D’ADRESSES Canaux...
Pagina 16
Manuel d’utilisation - DMX24 16 BIT NOMBRE D’ADRESSES Canaux...
Pagina 17
Manual - DMX24 INTRODUCTION Thank you for purchasing our products. To optimize the performance of your laser, please read this manual carefully and become familiar with the basic operation of this system. These instructions also contain important safety information about the use and maintenance of this system.
Manual - DMX24 TECHNICAL PARAMETERS IN AND OUTPUTS Input voltage 12-24V DC Input current 120.5A Output voltage 24x 12-24V DC Output current 5A/Ch Output power 24x 60-120W Output type Constant voltage SECURITY AND EMC EMC standard (EMC) EN55032:2015, EN61000-3-2:2014, EN61000-3-2:2013,...
Manual - DMX24 WIRING DIAGRAM Connecting with green terminal(DMX AMP) or an extra amplifier will be needed when more than 32 decoders are connected, or use overlong signal line, signal amplification should not be more than 5 times continuously. If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W 90-120Ω...
Pagina 20
Manual - DMX24 DMX decoder mode DMX decode start address: 001~512 DMX decode mode: • DIM (1CH single color) 8 outputs • CCT (2CH color temperature) 16 outputs • RGB (3CH) 24 outputs See address setting table at the end.
Pagina 21
Manual - DMX24 Mode brightness: 10%-100% PROGRAMMA’S White chase jump White synchronous fade White chase fade Color synchronous jump (Red,Orange, Yellow, Green, Cyan, Blue, Purple, White) Color chase jump (Red, Orange, Yellow, Green, Cyan, Blue, Purple, White) Color synchronous gradual...
Pagina 22
Manual - DMX24 8 BIT ADDRESS QUANTITY Channels 16 BIT ADDRESS QUANTITY Channels...
Pagina 23
Manual - DMX24 16 BIT ADDRESS QUANTITY Channels...