Download Print deze pagina

Tempro Air Co2ntrol 5000 Handleiding

Co2-monitor met datalogger functie (micro-sd-kaart)

Advertenties

Beschikbare talen

Beschikbare talen

Air Co
ntrol
2
-Monitor met datalogger functie (Micro-SD-Kaart)
CO
2
CO
-Monitor with Data logger function (Micro-SD-card)
2
5020-0111
5000
-Monitor met datalogger functie
CO
2
(Micro-SD-Kaart)
CO
-Monitor with Data logger function
2
(Micro-SD-card)
Handleiding
Operating Instruction
2
7

Advertenties

loading

Samenvatting van Inhoud voor Tempro Air Co2ntrol 5000

  • Pagina 1 Air Co ntrol 5000 -Monitor met datalogger functie (Micro-SD-Kaart) -Monitor with Data logger function (Micro-SD-card) 5020-0111 -Monitor met datalogger functie (Micro-SD-Kaart) -Monitor with Data logger function (Micro-SD-card) Handleiding Operating Instruction...
  • Pagina 2 Inhaltsverzeichnis 5.1. LCD Display Seite Seite 1. Inleiding 6. Specificaties 2. Opmerkingen/ Let op 7. Achteraanzicht: 1. CO2 / TEMP / RH-grafiek 2. Max. Aflezing grafiek 3. Leveromvang 8. Disclaimer: 3. Min. Aflezing grafiek 4. Overzicht van functies 9. Algemene bepalingen 4.
  • Pagina 3: Real-Time Klok

    5.6 SD-kaart voor records (datalogging) Instellen van de grenswaarden. Er kunnen twee grenswaarden (LOW of HI) De Air CO2ntrol 5000 registreert meetwaarden (CO2, temperatuur en relatieve luchtvochtigheid) worden ingesteld. Druk op de menuknop totdat streepje onder ADV knippert. zodra een SD-kaart wordt geplaatst. Het standaard meetcyclustempo is 5 seconden.
  • Pagina 4 7. Achteraanzicht: Index 6. Specifications 1. Introduction 2. Kindly note 7. Rear View 3. Delivery contents 8. Disclaimers 4. Features at a Glance 9. Explanation of symbol 5. Bedienung des Gerätes 10. Waste disposal 5.1 LCD Display 5.2 Trend Chart 5.3 Trend Chart Zoom 5.4 Max/Min 5.5 Real Time...
  • Pagina 5 5.1. LCD Display 5.4 Max/Min At the top right corner of the display, there are two numerical indicators: Max (2) and Min (3). As the Zoom Level is changed, the Max and Min values will reflect the maximum and minimum values on the chart of the selected CO parameter.
  • Pagina 6 7. Rear View: Function Directions ALTI This feature provides an altitude correction to the CO level for increased accura- cy. Select this feature, then use UP and DOWN to input the current altitude (look it up if unknown) in meters. Press ENTER once altitude is correct. ºC/ºF Use this feature to toggle between Celsius and Fahrenheit for the temperature display.
  • Pagina 7 DOSTMANN electronic GmbH Mess- und Steuertechnik Waldenbergweg 3b D-97877 Wertheim-Reicholzheim Germany Phone: +49 (0) 93 42 / 3 08 90 E-Mail: info@dostmann-electronic.de Internet: www.dostmann-electronic.de Technische Änderungen vorbehalten ● Nachdruck auch auszugsweise untersagt Stand02 1812CHB ● © DOSTMANN electronic GmbH Technical changes, any errors and misprints reserved ● Reproduction is prohibited in whole or part Stand02 1812CHB ●...

Deze handleiding is ook geschikt voor:

5020-0111