Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Fitting storage racks
1 Hook pin (1) in openings (2) of rails (C).
2 Push bottom part (B) towards side (A).
3 This causes pin () to slot into the next opening (4) in the rails.
4 Fit the other pins at the same height.
5 Place the storage rack (D) sliding the pins (5) in the openings (6).
Power supply
• This product uses a separate device cable as the power cable. If this device cable is damaged it must be
replaced with an original cable supplied by the producer.
• In case of emergency: remove the plug lead from the socket.
• The socket should be within easy reach of the cabinet.
• Check for the correct power supply, referred to the information on the type plate.
• Ensure that the plug lead cannot become trapped or snagged.
• If necessary the plug lead can be extended by a qualified electrician.
• We do not recommend the use of an extension lead.
Fluctuations in the power supply can cause damage, which causes the cabinet to switch off.
Gamko cannot be held responsible for any consequential damage.
0
Advertenties
Hoofdstukken
Inhoudsopgave
