Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CONTROLS
Appliance controls
The control panel is shown in Figure 10. For your reference, it is also
shown below:
When the appliance is plugged in for the first time, all indicators will
light up, then the freezer function and temperature will of –20°C will
be set by default.
The appliance has non-volatile memory and temperature setting will
not change when power fails and is then restored.
Select function
Touch and hold
freezer function, the temperature indicator in the other column will
light up.
Touch the
temperature settings.
Super Cool - touch
temperature inside the refrigerator will be set to + 2°C. This function
will turn off automatically after 150 minutes, or when you touch
Fast Freeze - touch
freezer will be set to –24°C. This function will turn off automatically after 24 hours, or
when you touch
Note: When changing the appliance mode of operation from the freezer to the
refrigerator, remove all frozen food and place the fresh food to be cooled after about an
hour. Do not place fresh food inside the appliance within an hour as it will cause frosting.
Error Codes:
Error
Signaling (flashing at the same time)
Refrigerator
code
E1
and 2
E4
and 3
E6
2 and 4
E7
and 4
E10
2 and 3
-
adjust temperature inside the chamber
-
select function
for 3 seconds to select the refrigerator or
sensor repeatedly to cycle through the available
to change the temperature.
repeatedly until
to change the temperature.
Freezer
and –24
and –22
-24 and -20
and –20
-24 and -22
- 16 -
repeatedly until
lights up. The
lights up. The temperature inside the
Description
Temperature sensor failure
Heater sensor temperature error
Communication error
Ambient temperature sensor error
Control error
Advertenties
Inhoudsopgave
