Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
bolt through the holes and tighten the nut. Do not completely tighten
it at this stage.
Push the fan guard retaining clips into position ensuring that they fit
•
correctly into the rim of the fan guard.
•
Now you can completely tighten the bolt and nut which passes
through the rim of the fan guard.
OPERATING THE PEDESTAL FAN
• Place the fan on a stable, even and dry surface.
• Plug the fan into the mains socket. Select the desired speed setting.
There are 4 setting: 0 (off) – 1 (low) – 2 (medium) – 3 (high).
• The fan has an oscillating function. You can activate this function by
pushing the oscillating knob downwards. To stop the oscillating
function, pull the knob upwards.
• To adjust the tilt angle of the fan, loosen the neck screw, swiveling
the fan until you have the correct angle. Tighten the neck screw
again.
Caution: Make sure the fan is switched off when adjusting the
settings above.
CLEANING AND MAINTENANCE
Switch off the fan and unplug it from the power supply before
•
assembling, disassembling or cleaning the fan.
•
Keep the ventilation openings on the rear of the motor housing free
of dust and lint. You can remove dust and lint that has accumulated
in the ventilation openings with a vacuum cleaner. Do not use any
other tools to clean these vents.
You can clean the fan parts with a mild soapy water and a damp cloth
•
or sponge. Ensure that no water or other liquids run into the motor
housing.
•
Thoroughly rinse with clean water to remove all the soap residue.
•
ATTENTION: do not use aggressive abrasive cleaners, chemical
cleaners on solvents to clean the fan, these can damage the finish
of the fan surface.
Advertenties
Inhoudsopgave
