Advertenties
Beschikbare talen
Beschikbare talen
READ THESE INSTRUCTIONS CAREFULLY
First position , second position and last position of the bottom.
The bottom (E) can be placed in a high position using the 4 metal supports (40D). Put
them in the therefor designated holes (1 or 2). Secure the bottom (E) with the bolts (36A),
washers (4) and nuts (5) onto the metal supports (40D). Make sure the identity sticker on
the bottom (1D) faces downwards. When the child is old enough to crawl or can pull up
itself you must put the bottom (E) in the lowest and last position. To do this, place the 4
metal supports (40D) in the designated holes (3). Secure the bottom (E) with the bolts
(36A) and nuts (5) onto the metal supports (40D).
General safety instructions:
• Warning: Never leave your child unsupervised.
• When the child is able to climb out of the playpen, to prevent injury from falling, the playpen
shall no longer be used for that child.
• Maximum age of child for which the playpen is intended is 24 months.
• Maximum weight of the child for all bottom positions: 15 KG
• Warning: Do not place the playpen close to an open fire or other heat source.
• Warning: Don't leave anything in the playpen that could endanger the child.
• Warning: Don't leave anything in the playpen that the child could use as a stair or foothold.
• Warning: Don't leave anything in the playpen that could cause suffocation, strangulation or
entanglement of the child.
• Make sure the identity sticker on the bottom (E) faces downwards.
• Check regularly that the bolts (36A) on the corners and the 4 nuts (5) of the adjustable
bottom are properly tightened.
Warning: never use more than 1 mattress in the playpen.
•
Recommended dimensions of the mattress: l x w x h = 925mm x 725mm x 40mm and the
•
recommended minimum dimensions of the mattress: l x w = 895mm x 695mm. The space
between the mattress and the bars is not allowed to be more than 30mm.
The distance from the top of the mattress to the top of the bars must be at least 500 mm in
•
the lowest position and at least 200 mm in the highest position. Take this into account when
you purchase a mattress. The thickness should be matched to these dimensions.
Ensure that the mattress does not exceed the indicated mark (P).
•
THIS PLAYPEN MEETS THE STANDARD EN 12227:2010
•
• When the child is old enough to crawl or can pull up itself you must install the bottom (E) in
the lowest and last position.
• Warning: Do not use the playpen without the bottom.
• The playpen may not be used if a part of the box is broken, bent or missing.
Maintenance instructions: The playpen is maintenance-free. Use a slightly damp cloth and
•
a mild detergent to clean the playpen.
• Accessories which are not approved by the manufacturer shall not be used.
GB - PLAYPEN FLEUR
IMPORTANT !
KEEP FOR FUTURE REFERENCE
Advertenties
