Advertenties
Beschikbare talen
Beschikbare talen
Quick Links
This Plug-in thermostat is designed to be used as a pumpcontroller or thermostat with internal or external sensor.
Keys features
Plug in design make it easy to install.
Three buttons make it easy to operate.
Heat Mode, Cool Mode Available.
The display shows the temperature and the set mode.
Temperature display in degrees Celsius.
Simple coding in display for each function.
With EEPROM backup
Heat Pump Protection
Technical data
Output Voltage:
Switching Capacity:
Backup storage:
Sensor Mode:
Temperature settings:
Accuracy:
Thermostat dimension:
Color:
IP protection rating:
Certification:
Parameter settings
Under off status, press "+" button and "-"button at the same time to enter into the parameter settings. Each press of the on/off button you
enter to the next item setting. With the "+" or "-"button you be able to change the settings.
No.
01
02
03
04
06
07
NOTE: when pumpprotection function is enabled the controller activate every 11 hours for aprox 30sec. when there is no
request for heat!
LCD Display
Each set includes;
-
Plugin controller
-
External sensor
-
Clamp for conduit
-
Manuel
Plug-in pumpcontroller / thermostat TC-500
230Vac
3600W/16A (ohmic load)/3A cap.load
EEPROM
Internal sensor or external sensor
0°C ~ 65°C. (default: 28°C)
+/- 0.5°C (+/- 1°F).
70 mm x 41.5 mm x 140mm.
White
20 (sensor IP44).
CE, EN.
Item
Temp. Calibration
Mode
Sensor Mode
Dead Band / Hysterese
Heat pump protection
Software Version
COPYRIGHT © AND REGISTRERED ® BY LVDS UNDER LICENSE BY 2HEAT
Range
-9℃ ～+9℃
0: Cool 1: Heat
0: Air 1: External
0.5 ～2
0：OFF 1: ON
1013
Icons:
Heat Mode
Cool Mode
Pump Protection On
Pump Protection OFF
External Sensor
Air Sensor
Default
0℃
0: Cool
1: External
0.5
1: ON
Advertenties
Gerelateerde Handleidingen voor 2HEAT TC-500
Samenvatting van Inhoud voor 2HEAT TC-500
- Pagina 1 LCD Display Icons: Heat Mode Cool Mode Pump Protection On Pump Protection OFF External Sensor Air Sensor Each set includes; Plugin controller External sensor Clamp for conduit Manuel COPYRIGHT © AND REGISTRERED ® BY LVDS UNDER LICENSE BY 2HEAT...
- Pagina 2 When using the clamp to mount the sensor onto a conduit, beware that the sensor is not being damaged. Don’t use extremely force to mount the sensor on the conduit. COPYRIGHT © AND REGISTRERED ® BY LVDS UNDER LICENSE BY 2HEAT...
- Pagina 3 Verwarmings modus Koel Modus Pomp protectie AAN Pomp Protectie UIT Externe sensor Interne sensor Elke set is inclusief; Plugin controller Externe sensor Montagebeugel tbv sensor bevestiging op buis Handleiding COPYRIGHT © AND REGISTRERED ® BY LVDS UNDER LICENSE BY 2HEAT...
- Pagina 4 Wanneer de montagebeugel wordt toegepast draag er zorg voor dat deze niet de sensor beschadigd. Monteer het geheel met beleid en gebruik geen extreme krachten om deze te monteren. COPYRIGHT © AND REGISTRERED ® BY LVDS UNDER LICENSE BY 2HEAT...