Advertenties
Beschikbare talen
Beschikbare talen
Manuel
EN
Do not disassemble any part of this appliance. Otherwise, warranty would become
ineff ective. The battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing the
battery. The battery is to be disposed of safely.
Before operation
1. Before using the fan, well assembled/installation fan, make sure that it is on dry fl at
and table surface. Damage may occur if the fan is placed on an incline or decline.
Before moving this appliance, please shutdown and unplug it. Use two hands to
hold the column and lift this appliance up for moving.
2. Insert the plug directly into a standard AC power outlet Be sure that the plug fi ts tightly
into the power outlet. Plug in the power outlet, it will "beep" once, then it is in standby
mode. Turn off the power before pulling the plug out. To remove the plug from the
power outlet by pulling the supply cord is strictly prohibited. Unplug this appliance by
grasping plug and pull out from the outlet. Please do not unplug this appliance while
it is in operation. Do not use the power supply with power/voltage not match with this
appliance. Unplug and well stored the appliance if it is not in use.
Before you begin
Make sure your mobile device is running iOS 9 or higher or Android 5 or higher.
Verify your Wi-Fi network/name and ensure your mobile device is connected to the
same 2.4 GHz Wi-Fi network/name/router (5.0 GHz Networks are NOT supported!).
Download the FlinQ Smart App
Search for FlinQ' in the Apple App Store or the Google Play Store and download the
application.
Register / Login / Profi le
1. Open the FlinQ Smart application.
2. Tap 'agree' to confi rm the privacy policy.
3. To register, please enter your mobile phone numer or email address.
4. Press 'verifi cation code retrieval'
5. Enter the verifi cation code that was sent to your phone number or email address.
6. Create a password and login for the new app user. If you already have an existing
account, please go to Login.
Install the Breeze fan 1/2
Fix the stand onto the base
1
Place the fan pole on the base. Tighten
the ring on the underside of the base
Push the button
Adjust the height if needed
2
Use only when higher position required.
Pressing the height adjust button, pull
the slide pipe upwards. When lower
position required, just push the slide pipe
downwards.
FlinQ Smart Indoor Breeze Fan
by rotating it clockwise. Tighten the ring
securely.
Advertenties
