USE
Operation
Remote control
4
5
Switching the fan on and off
1. Touch the extraction on/off key.
• The cooker hood switches on at speed 1.
• The indicator on the cooker hood shows the selected speed:
▷ green = speed 1;
▷ orange = speed 2;
▷ red = speed 3;
▷ red, flashing = speed 4 (maximum of 7 minutes, after which
the speed switches back to speed 3).
2. If so required, select a higher speed using the '+' key.
3. Select a lower speed using the '-' key.
Switching the lighting on and off
1. Touch the lighting on/off key.
▷ The light turns on.
▷ Touch the on/off key again to switch the lighting off.
Linking the remote control to the cooker hood
1. Disconnect the cooker hood from the power supply by setting the
group fuse in the meter cupboard to '0' or removing the fuse from
the fuse holder.
2. Reconnect the cooker hood to the mains by setting the group fuse
to '1' or placing this in the fuse holder.
3. Within 5 seconds, touch the lighting key until the lighting is on.
4. Within 5 seconds, touch the extraction on/off key.
▷ Wait at least 10 seconds before you using the cooker hood.
▷ If the remote control is replaced, repeat the steps for linking the
remote control.
6
7
8
EN 5