Advertenties
Beschikbare talen
Beschikbare talen
Manuel
EN
Wall mounting instructions
Drill the holes
1
Mark the positions of the four holes to be
drilled on the wall, and drill the holes.
Insert screws
3
Insert the screws in to the plugs.
Note: Make sure the distance between the bottom of the heater and the fl oor is no
less than 20cm when the heater is installed.
Insert plugs
2
Insert the 4 plugs in to the holes in the
wall.
Place heater on the wall
4
Lift the heater and aim the four holes on
the brackets at back of the heater to the
4 screws on the wall, and slide the screw
from Position A to Position B by moving
the heater slightly.
Free standing instructions
Place the feet on the ground
1
Place the free standing feet on the
ground.
Mount the feet on the heater
3
Snap the stander into the groove of the
bracket on the bottom, cover the caps
and the screws, then screw the bolts in to
the holes on the bracket.
FlinQ Smart Indoor Infrared Heater
Place cover caps
2
Cover the 4 caps onto the 4 screws on the
brackets on the back side of the heater.
Advertenties
