Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains
voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must
also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
CONTROLS AND CONNECTIONS
1.
Microphone Level Channel 2
Adjust the signal level of microphone channel 2.
2.
Microphone Level Channel 1
Adjust the signal level of microphone channel 1.
3.
Microphone Echo
Adjust the intensity of the echo effect.
4.
Input selector switch
Selects the input signal:
• Button not pressed: signal of media player.
• Button pressed: signal of the line input.
5.
Equalizer
5-band equalizer for the master signal. Adjust
frequencies are 100Hz, 300Hz, 1kHz, 3kHz,
10kHz.
6.
Microphone Input Channel 1
XLR input jack for connecting a microphone.
7.
Microphone Input Channel 2
6.3mm ¼" input jack for connecting a microphone.
8.
Line In-/ Output
RCA jack in- and output for connecting audio units
with line level output (e.g. mixer, CD player, tape
recorder).
9.
AUX Input
3.5mm jack input for connecting units with line
level (e.g. CD/MP3/DVD player, hi-fi system, PC).
10. Input selector switch
Selects the input signal:
• Button not pressed: signal of the line input.
• Button pressed: signal of media player.
11. Volume
Adjust the overall output level of the portable
sound system.
12. Mode button
Press the button to select BT/USB/SD function.
Press for 2 seconds to turn the mediaplayer on or
off.
13. Backward button
Press key for select last title (short actuation) and
decrease volume (long actuation).
14. Forward button
Press key for select next title (short actuation) and increase volume (long actuation).
15. Repeat button
Press key for repeating of single track or all tracks.
16. Play button
For switching between play and pause.
17. LCD Display
Display show you some information as playback support, file name, elapsed time, total time, file number, total file
number, file and playback mode.
18. SD port
4
Advertenties
Inhoudsopgave
