Advertenties
Beschikbare talen
Beschikbare talen
b) In the Web Interface
• Connect the PoE adapter to the plug-in mains adapter and plug it into a mains socket to reset
the WLAN router to the factory settings with the web interface. Connect the PoE adapter to
the router and wait for approx. 1 minute until the starting process is completed.
• Log into the web interface as described in chapter 8.
• First click "Administration" and then "Settings Management".
Click the button "Load Default" to start the reset process.
• Whether or not the reset was accepted can be seen by all LEDs except for the Power LED at
the router going out for a certain time after a few seconds.
• The device now restarts. This will table take about 1 minutes. Then it is reset to factory set-
tings.
15. Maintenance and Cleaning
Servicing or repair must only be carried out by a specialist or specialist workshop. The product
contains no parts that require servicing by you. Therefore, do not open it.
A dry, soft and clean cloth is suffi cient for cleaning the outside.
Never use any aggressive cleaning agents, alcohol or other chemical solutions that
would damage the casing (discolouration).
72
All manuals and user guides at all-guides.com
Advertenties
