Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connection and Control Elements
(10) CH1 and CH2 channel fader
•
Use these sliders to set the volume for the respective channel.
(11) Crossfader
•
Control for crossfading between the two channels.
•
One channel is faded out when the slider is operated (volume decreases), while the other is faded in at the same
time (volume increases).
•
When the crossfader is in centre position, both channels are played equally.
(12) MASTER VOL control
•
Set the volume for the AUDIO OUTPUT (39) output with this control.
(13) CUE/MIX control
•
This control determines the signal to be played back on the headphones channel.
•
The position CUE only plays back the CUE channel activated with the CUE SELECT (9) button; position PGM
only plays back the master channel.
(14) SET CUE button
•
Press this button to return to the last CUE point and to switch to pause.
•
Keep this button pressed to start playback from the last CUE point. Releasing this button again causes playback
to jump back to the CUE point and switch to pause.
(15) CUE button
•
Press this button to start playback from the last CUE point.
(16) button
•
Press this button to start playback.
•
Press the button again to interrupt playback.
(17) JOG wheel
•
Turn this wheel during playback to change the playback speed.
•
In pause mode, you can precisely access a desired position on the piece of music.
•
When the JOG MODE (18) has activated the scratch function, the jog wheel is used to control the scratch effect.
All manuals and user guides at all-guides.com
39
Advertenties
Hoofdstukken
Inhoudsopgave
