Advertenties
Beschikbare talen
Beschikbare talen
6.
Place the drilling template and mark the center of the drill holes. Drill the
holes Ø 25 millimeter and 26 millimeter deep.
7.
Chop the wood residues between the drill holes with a chisel.
8.
Now remove the marked part of the closing plate to a depth of 2 millimeter.
9.
Mount the closing bowl with 2 screws 4.0 x 45 millimeter (for drilling Ø 2
millimeter). Use the holes for this. Make sure that these slanted positioned
screws enter the thick part of the frame (figures C and E).
10. Place the locking plate and mount it with 2 screws 4.0 x 45 millimeter (pre-
drill Ø 2 millimeter).
11. Check whether the door does not jam and closes as required. Adjust if
necessary (figure F). Fold over the lip of the closing plate (figure G).
Closing plate
Security hook
With installation lock 1217749 adhere to the tolerance
specified above.
Loosen the two screws, this part
Draai de twee schroeven los, dit
can then be moved by a maximum
deel kan dan maximaal 4 mm
of 4 millimeter.
verschoven worden.
Advertenties
