Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
eNet
eNet radiografische schakel-/pulsactor 2-voudig mini
Manual commissioning
Repeater mode
Settings, channel
Parameters
Manual commissioning
Operating mode
82579123
J0082579123
On, Off
Basic setting: On
On, Off
Basic setting: Off
Setting options, Basic set-
ting
On, Off
Basic setting: On
Switching operation
Push-button operation
Flashing
Continuous on
Continuous off
Basic setting: Switching ope-
ration
6/10
Blocks manual commissioning
for all device channels. In the
"Off" setting, the device can-
not be reset to the factory set-
ting.
In addition to its other functi-
ons, the device can be used
as a repeater. In the "On" set-
ting, the device repeats all the
received telegrams.
Explanations
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device can-
not be reset to the factory set-
ting.
Switching operation
After switch-on, the device
remains stable in the "On" sta-
te, and stable in the "Off" state
after switch-off.
Push-button operation
The device switches "On"
when any channel button of a
radio transmitter is pressed
and "Off" when the button is
released. It is irrelevant whe-
ther the "On" or "Off" channel
button is pressed.
Flashing
Switch-on starts flashing and
switch-off stops flashing. The
default flash frequency is 1
Hz. This frequency is also the
maximum flash frequency.
The flash frequency can be
changed using parameters.
The parameter "Switch-off
delay" is used for the pulse
time and the parameter
"Switch-on delay" for the pau-
se time.
Continuous on
The output switches to conti-
nuously "On". All operations of
radio transmitters and the
Prog button are ignored.
Continuous off
The output switches to conti-
nuously "Off". All operations of
radio transmitters and the
Prog button are ignored.
24.06.2016
Advertenties
Inhoudsopgave
