Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Place three AA batteries in the thermostat if required.
These are not provided. The batteries ensure that the
clock keeps running when the boiler is switched off.
The batteries also power the backlight for the iC200 for
boilers that do not have OpenTherm Smart Power. If you
have a boiler with Smart Power, then the backlight for the iC200
also works without batteries.
(iC200 RF only) Place 3 AA batteries in the thermostat.
These are required to operate the iC200 RF.
i
The programs that are set are saved if the boiler or the iC200 is switched off
(even if there are no batteries).
The iC200 RF automatically starts communicating with the Base station.
3.3 Location of the outside sensor
An outside temperature sensor is not supplied as standard with the iC200.
You only require this sensor if you want weather-compensated control of the inside temperature.
The following guidelines apply with regard to choosing a location for an outside temperature sensor:
•
Install the outside sensor on the north or north-west side of the home, away from direct sunlight.
•
The sensor must be positioned at least 2.5 metres above ground level.
•
Do not install the outside sensor near windows, doors, ventilation grills, extractors, etc.
Consult the documentation for your boiler for information on connecting an outside temperature
sensor.
EN
T001042-B
51
Advertenties
Hoofdstukken
Inhoudsopgave
