Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cleaning the device
ATTENTION!
•
Empty the dust bin when it is full and clean the filters regularly to avoid over-
heating the motor.
•
Before cleaning the device, always pull the power plug out of the socket.
•
Keep the device, cord and mains plug away from water or other liquids in order
to avoid electrical shocks. When cleaning, make sure that no liquid penetrates
the device. Only the foam dust filter, plastic dust filter, micro filter and exhaust
filter may be cleaned with water. However, they must be completely dry when
being placed back in the device.
•
The filters are not suitable for the washing machine, dishwasher or dryer! Only
air dry the filters and do not in any circumstances use a hair dryer.
•
Do not use any scouring or abrasive cleaners or cleaning pads for cleaning. They
could damage the surface.
•
Clean the dust filter and exhaust filter regularly or if you notice that the suction
power is declining.
•
If needed, clean the housing with a damp, soft cloth. Then dry it with a soft
cloth.
•
Regularly remove hairs and lint from the nozzles. The filters may discolour over
time. This is normal and does not affect functionality.
Emptying the dust bin
•
Remove the suction hose from the dust bin (see chapter "Assembly", section
"Inserting/ removing the hose").
•
Push the release button on the dust bin and pull it out of the device by the han-
dle.
•
Hold the dust bin over an open garbage bin. The
dust bin should be as close as possible to the
garbage bin so that dust from the dust bin only
falls into the garbage bin and is not dispersed in
the surrounding area.
•
Push the button to open the dust bin. The bot-
tom of the dust bin will open and the dirt will
fall out.
24
Advertenties
Inhoudsopgave
