Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Problem
The battery status LED does not
flash green, although the power
adapter is connected and plugged
into a wall socket.
The battery is not charging.
The screen is dirty or smudged.
The text is too small or large to read.
LED lights produce glare on
reflective surfaces.
34
Solution
Ensure that the barrel end of the power adapter is firmly plugged
into the device's power port.
Check whether the power outlet is functioning properly. If the outlet is
connected to a wall switch, make sure the switch is set to ON.
Use the supplied power adapter to charge the eMag 70 HD.
Connecting the device to a USB port will not provide sufficient power to
charge the battery.
Make sure the barrel end of the power adapter is firmly plugged into the
device's power port.
Check whether the power outlet is functioning properly. If the outlet is con-
nected to a wall switch, make sure the switch is set to ON.
Clean the LCD screen as described –> on page 38.
Press the yellow buttons (
For live images, press and HOLD the yellow buttons (
continuous zoom magnification. For captured or saved images, press the
yellow buttons (
and
Press and HOLD the green/yellow button
to turn off the LED lights.
and
) to increase or decrease magnification.
) to zoom in or out one step at a time.
and then press the red button
and
) for
Advertenties
Hoofdstukken
Inhoudsopgave
