Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Fault
When the
The machine has
main switch
no power supply.
is pressed the
machine does
not turn on.
The service door
is open.
Coffee grounds
collector (8) is
not correctly
inserted.
The water tank is
empty.
Percolation
The device is in
does not start.
steam extraction
mode.
The brew group
is not correctly
inserted.
In the coffee
preparation
cycle the noise
The coffee beans
of the grinding
are used up.
mechanism be-
comes louder.
Hot water/steam
No hot water/
nozzle (14) is
no steam
blocked.
No coffee
The water
comes out, but
system has not
there is no error
been fi lled with
message in the
the water from
display.
the tank.
The coffee spout
(13) is blocked.
No coffee
comes out /
the coffee only
The water sys-
comes out
tem is blocked
slowly.
by lime.
Degree of grin-
ding too fi ne.
The heating
time becomes
longer, the
The device is
warm water
furred up.
quantity smal-
ler.
26
Downloaded from CoffeeMachineManual.com Manuals
05-KAV 2936 GB 26
Possible
Remedy
Causes
Check the socket
with another
device and insert
the mains plug
correctly.
Please close the
door.
Insert the coffee
grounds collector
correctly.
Fill the water tank.
Turn the machine
back to normal
mode.
Insert the brew
group correctly (see
section „Position of
the Drive Shaft").
Switch off the de-
vice and fi ll up the
container (2).
Unblock the
opening with a thin
needle.
Follow the instruc-
tions in the section
on „Initial Use"
carefully.
Switch off the
machine. Clean the
coffee spout and
the fi lter (diagram
B) in accordance
with the instruc-
tions in the section
"Cleaning and
Maintenance".
Carry out descaling
and cleaning.
If the problem per-
sists, set a coarser
degree of grinding
(see section „Set-
ting the Degree of
Grinding").
Start the descaling
programme.
Possible
Fault
Causes
The coffee mix-
The coffee is
ture used is not
not creamy
suitable.
enough.
Degree of grin-
ding too coarse.
The milk is not
The milk is not
foamed.
suitable.
The start and
end position of
The brew group
the brew group
becomes stuck
do not corres-
in the service
pond to the start
chamber.
position of the
drive shaft.
Technical Data
Model:
Rated voltage/frequency:
Power consumption:
Protection class:
Water tank:
Coffee bean container:
Coffee grounds container:
Dimensions
(W x H x D):
approx. . 34,2 x 26,6 x 36,7 cm
Weight:
This device has been tested according to all relevant
current CE guidelines, such as electromagnetic com-
patibility and low voltage directives, and has been
constructed in accordance with the latest safety
regulations.
Subject to technical changes without prior notice!
Remedy
Try different coffee
mixtures.
Set to a fi ner de-
gree of grinding.
Check the fat
content. Use low
fat milk.
Switch the machine
on and off at least
fi ve times in a row.
Before switching
off each time allow
the adjustment
procedure of the
machine to fi nish -
loud clicking noises
are normal. Before
switching on again
each time please
check whether the
brew group has
come loose.
CB 2001 / CB 2002
230 V ~ 50 Hz
1300 W
Ι
1,4 l
250 g
0,6 l
approx. 9 kg
06.12.2004, 8:54:00 Uhr
Advertenties
Hoofdstukken
Inhoudsopgave
