Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• Do not expose the device to heat (radiator, oven, etc.),
direct sunlight or humidity.
• Do not use any accessories other that those
recommended by Carmen.
• Keep the device clean and do not use abrasives or
products containing solvents.
• Connect the device only to an electrical system that
meets the prevailing regulations and that is equipped
with a delay fuse. Make sure that the maximum current
of all devices connected to this fuse does not exceed its
maximum current (16A).
• We recommend equipping the group to which the
bathroom is connected with a residual current operated
circuit breaker of maximum 16A to increase safety. Ask
your electrician for advice.
• The most recent instruction manual can be found on the
Carmen website: www.carmen.nl
> DIRECTION FOR USE
Before you can use the appliance, its batteries must be fully
charged. The duration of the battery depends on the kind of
attachment and the time of work that is been done.
Fully charge the trimmer before using it for the first time or
after non- use for a long period of time.
Battery performance is best if you
recharge only when the battery is (almost)
completely empty.
Charging or recharging at temperatures
below 10 °C or higher than 40 °C
adversely affects lifespan of the battery.
Continuously recharging trimmer will
reduce lifespan of battery. Do not charge
for more than 12 hours. When the device
is under charge, the red light turns on.
Choose the desired attachment. Place it
on the device by inserting the protrusion
of the cutting element into the guiding
slot at the front and push the back of the
cutting element onto the device.
Then a click sound is made. When
removing the attachment, proceed
reversely. Press lightly on the fixed
attachment from the front part of the
attachment. This will release it, you can
now remove it.
ENGLISH • 5
Advertenties
Inhoudsopgave
