Ventilation requirements
min.
5 cm
200 cm
Installing the appliance
Caution! Make sure that the mains cable can
move freely.
x
28
2
min.
200 cm
2
x
• Loosen and remove the lower pin.
On the opposite side:
• Tighten the lower pin.
• Install the lower door.
• Tighten the middle hinge.
• Install the spacer.
• Install the upper door.
• Tighten the upper pin.
The airflow behind the appliance must be sufficient.
Do the following steps:
If necessary cut the adhesive sealing strip and apply
it to the appliance as shown in figure.