Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LIMA 01 01 63xx
4. Assembling the bed
Step 1 : Use parts A, B and the 8 large bolts (E)
Place the 8 large bolts (E) in the provided openings on the upperside and the bottom of the legstruc-
tures (A). Insert the sides (B) with the holes on the bars faced inwards the box, between the legstruc-
tures and pull the bolts one by one backwards and push them back into the openings of the sides.
The sides are now hanging free between the legs.
Step 2 : Use the 8 cylindrical dowels M6 (F) and the parts of step1
Insert one by one the cylindrical dowels (F) in the provided openings of the sides (B). Pay attention
that the opening in the dowel faces the bolt. Tighten slightly with the hexagonal key (H). Repeat this
action for the remaining 7 bolts.
Step 3 : Use the parts of step 2, the bottom J, 4 crochet hooks (D), 4 spacers (G), 4 short bolts (C)
and the 4 nuts M6 (K)
Place the crochet hooks (D) in the provided openings on the legs (A). Pay attention that the four of
these are on the same height of one of the possible positions for the base. Insert the base (J) into
the bed and let it rest on the crochet hooks. Push a short bolt (C) through an opening of the base
and the underlying crochet hook, place one spacer (G), a nut (K) and thighten slightly. Repeat for the
remaining three bolts. Finally tighten.
Always fasten the bottom on the hooks with the bolts (C) in order to comply with the Euro-
pean legislation.
Step 4 : FInally fasten all large bolts fi rmly (E - step 1)
Step 5 : Changing the position of the base
Redo all actions of step 3 in reversed order. Replace the crochet hooks on a diff erent level and repeat
step 3.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
T
0032 9 380 80 95
www.quax.eu - E
E
info@quax.eu
17
Advertenties
Inhoudsopgave
