Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
•
Launch control: LED on when launch control is active
on when lambda control is active
•
Diagnostic: LED on when diagnostic error occurs
•
Powershift: LED on when powershift is active
•
Aux 1: LED on when aux 1 is active
•
Aux 3: LED on when aux 3 is active
drops below limit. The limit can be configured to suit your own requirements.
•
Fuel pressure: LED on when fuel pressure drops below limit. The limit can be
configured to suit your own requirements.
•
Water temperature: LED on when water temperature is above limit. The limit
can be configured to suit your own requirements.
•
EGT: LED on when exhaust gas temperature is above limit. The limit can be
configured to suit your own requirements.
Save and exit: Save new settings and return to LED
setup menu
6.6.2 Shiftlight
•
Cancel: Back to LED setup menu
•
All leds on at: Configure maximum RPM at
which all LED lights must be active
•
Delay between leds: RPM delay between the
seven LED lights (for example: All leds on at: 8000 rpm, delay between leds: 100
rpm. First LED light active at: 8000 – (6 * 100) = 7400 rpm)
new settings and return to LED setup menu
__________________________________________________________
KMS CAN display
Part nr: 01-01-01-0009
kms.vankronenburg.nl
•
•
Aux 2: LED on when aux 2 is active
•
Oil pressure: LED on when oil pressure
•
EN — NL — DE
Lambda control: LED
Save and exit: Save
EN
14
Advertenties
Hoofdstukken
Inhoudsopgave
