5.
Place the plastic cover filter (12) in the dust container (13).
6.
Then put the HEPA-filter (11) in the plastic cover filter.
7.
Mount the dust container with HEPA-filter thereafter on the motor (8). The hand vacuum cleaner is now fully assembled.
8.
Push the hand vacuum cleaner next, with the front side downwards,into the main unit until you hear a click(Fig. 5).
THE USE
Before use
Charge the device for at least 24 hours before first time use (Fig. 6). After this first time charge, the maximum charging time will be 16
hours.
Note: the device may become warm during charging. This is normal.
Check the device for damage before each use. Do not use the device if it is damaged or not working properly.
Use of the handheld vacuum cleaner
The handheld vacuum cleaner can be used for cleaning both wet and dry dirt.
1.
Make sure that the handheld vacuum cleaner has been mounted in the correct way (see chapter Assembly).
2.
Turn on the handheld vacuum cleaner by pushing the on/off switch on the handle (7) forward (Fig. 7).
3.
If desired, you can use the following attachments:
Note: always turn off the handheld vacuum cleaner before you mount the attachments on it.
a.
Crevice nozzle (16) (Fig. 8) to clean corners, cracks and other places which are difficult to reach.
b.
Oval brush (15) (Fig. 9) to clean furniture.
c.
Rubber nozzle (14) (Fig. 10) to clean up liquids.
Use of the upright vacuum cleaner
Note: the upright vacuum cleaner can only be used to vacuum dry dirt. In order to vacuum wet dirt, you must use the hand-held vacuum
cleaner with the rubber nozzle.
1.
Make sure that the upright vacuum cleaner has been mounted correctly (see chapeter Assembly).
2.
Turn on the upright vacuum cleaner by pushing the on/ff switch on the handle (20) forward (Fig.. 11).
Charging
As soon as the indication light power (6) is continuously on, you must recharge the device.
Note: always turn off the device before recharging.
At the moment you turn off the device, the power indication light will be switched off. As soon as the device has been fully recharged, the
light will switch on again.
After use
Recharge the device after use so it will have full power the next time you use it.
19